TOBY’S PVC PLANT COVER

This design only requires 3- ten ft lengths of PVC (3/4 in diameter) along with the couplings listed below. Very easy to assemble. Part #5 does not need to be threaded if you can find it without the threading. The finished plant cover is 4 ft wide by 5 ft long.
Materials List:
3- 10ft long 3/4″ PVC pipe
4- 3/4″ T-sections
4- 3/4″ 90 degree elbow joints
2- 3-way elbow joints (threaded-1/2″ x  3/4″ x  3/4″)*
*if you can find this part unthreaded (3/4″ x  3/4″ x  3/4″) you will not need the connectors below.
2- 3/4″ x 1/2″ connectors

Illlustration by Frank Richwood.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s